橡膠止水帶是采用天然橡膠與各種合成橡膠為主要原料，摻加各種助劑及填充料，經塑煉，混煉， 壓制成型，其品種規格較多，有橋型、山型、P型、R型、U型、Z型、乙型、T型、H型、E型、Q型等。該止水材料具有良好的彈性，耐磨性、耐老化性和抗撕裂性能，適應變形能力強、防水性能好，溫度使用范圍-45℃-+60℃。當溫度超過+70℃，以及強烈的氧化作用或受油類等有機溶劑侵蝕時，均不得使用該產品。
The rubber sealing strip is made of natural rubber and various synthetic rubber as the main raw material, and the filling material mixed with various additives, through mixing, mixing, molding, the more varieties of different specifications, bridge, mountain type, P type, R type, U type, Z type, T type, H type, type, E type and Q type etc.. The water stopping material has good elasticity, wear resistance, aging resistance and tear resistance, and has good deformation ability and good waterproof performance, and the temperature range is -45 DEG C or -+60 DEG C. This product shall not be used when the temperature exceeds +70 DEG C and is strongly oxidized or eroded by organic solvents such as oils.
使用方法
Usage method
橡膠止水帶必需采取可靠的固定措施，綁扎鋼筋和支模時。防止在澆注混凝土?xí)r發生位移，止水帶在混凝土中的正確位置。
Reliable measures must be adopted for rubber sealing strips to tie steel bars and support dies. Prevent displacement during pouring concrete and ensure the correct position of water stop in concrete.
只能在止水帶的允許部位上穿孔打洞，對于固定止水帶時。不得損壞止水帶有效防水部位。
Holes can only be punched at the allowable part of the water stopping belt. Shall not damage the effective waterproof part of the hose.
常用的固定方法有：利用附加鋼筋固定；卡具固定；用鉛絲和模板固定等。不論采用何種固定方法，對于止水帶的固定方法應按設計要求的施工規范進行且必需止水帶定位準確，不損壞止水帶有效防水部位，方便混凝土澆搗。
Fixed methods are commonly used: the use of additional reinforcement fixation; special fixture fixed with wire and fixed template. Regardless of the fixing method, fixing method for waterstop shall be according to the design requirements of the construction specifications and must ensure the waterstop positioning accuracy, does not damage the waterstop waterproof parts, convenient concrete.
分類
classification
按型號可分為：CB型橡膠止水帶（埋入式中間有孔型）；CP型橡膠止水帶（埋入式中間無孔型）；EB型橡膠止水帶（外貼式中間有孔型）；EP型橡膠止水帶（外貼式中間無孔型）。
According to the models can be divided into: CB type rubber zhishuidai (submerged middle pass); CP type rubber sealing belt (embedded in the middle of groovless); EB type rubber sealing belt (outside attached middle pass); EP type rubber sealing belt (post type middle pass free).
按材質可分為：天然橡膠止水帶，氯丁橡膠止水帶，三元乙丙橡膠止水帶。
According to the material can be divided into: natural rubber waterproof belt, chloroprene rubber water stop belt, three yuan ethylene propylene rubber water stop belt.
按使用情況可分為：中埋式橡膠止水帶和背貼式橡膠止水帶(外貼式橡膠止水帶)、鋼邊橡膠止水帶、遇水膨脹橡膠止水帶、平板式止水帶。
According to the use situation can be divided into: buried rubber water stop and back affixed rubber water stop (external rubber belt), steel edge rubber water stop, water swelling rubber water stop, flat type water stop belt.

查看全部介紹